ADT Security Services 3000 manual ’LVDUPLQJDQG6LOHQFLQJ$ODUPV, 8VLQJWKH2@NH

(Security Code)

’LVDUPLQJDQG6LOHQFLQJ$ODUPV

8VLQJWKH>2))@NH\

The OFF key is used to disarm the system, silence alarm and trouble sounds, and clear alarm memories.

IMPORTANT: If you return and the main burglary sounder is on,6)%(=-DO7%61)(NOT83ENTER,%61but CONTACT THE POLICE from a nearby safe location.

If you return after an alarm has occurred and the main sounder has shut itself off, the touchpad will beep rapidly upon your entering, indicating that an alarm has occurred during your absence.

LEAVE AT ONCE, and CONTACT THE POLICE from a nearby safe location.

1. + 1

OFF

The “READY” indicator light will be lit if all zones

are secure, and the touchpad will emit a single tone English Display: to confirm that the system is disarmed.

2.To Silence a Burglary Alarm and Clear a Memory of Alarm

Enter your security code and press the OFF key to silence the alarm (or warning tones of a Memory of Alarm).

Note the zone in alarm on the touchpad display, and make that zone intact (close door, window, etc.). Now enter the security code plus OFF sequence again to clear the touchpad’s Memory of Alarm display. Note the zone in alarm on the touchpad display, and make that zone intact (close door, window, etc.). Now enter the security code plus OFF sequence again to clear the touchpad’s Memory of Alarm display.

3.To Silence a Fire Alarm and Clear Memory of Alarm

Simply press the OFF key to silence the alarm. Then enter the security code plus OFF sequence to clear the touchpad's Memory of Alarm display. See the Fire Alarm System section.

– 18 –