HP VCX Software manual Show Configuration, Revert to Old Configurations, Abort All Edits

Chapter 7. Administration

Browse

Browse is used to scan your local disk. The web browser opens a new window where you can search among files and directories. Go to the right directory and select the file you want to upload.

Revert to Old Configurations

You can revert to old configurations of the Telecommuting Module, either back to the last configuration successfully applied, or to the configuration delivered with your Telecommut- ing Module from the factory.

Abort All Edits

Abort all edits copies the permanent configuration to the preliminary configuration. All changes made in the preliminary configuration are deleted.

Reload Factory Configuration

The factory configuration is the standard configuration that is delivered with a Telecommut- ing Module. Click on this button to load this configuration into the preliminary configuration. The permanent configuration is not affected.

Show Configuration

Shows both the preliminary and permanent configurations, in that order. Before the prelim- inary configuration, you see the Telecommuting Module’s version, serial number, the time zone and table format you selected.

If there are any differences between the preliminary and the permanent configuration, the message "This setting has been changed but not applied." will be shown in red at the setting in question, in the Preliminary section. If there are any errors in the preliminary configura- tion, this will also be marked in red in the Preliminary section.

The heading before each table for the preliminary configuration is clickable and accesses the corresponding configuration page.

Print this list from your web browser and store it in a safe place.

106