Chapter 15. Command Line Reference
Table type: Single row
The IP address and port which should allow SSH connections to the administrator interface.
Field Name | Field Type | Explanation |
ip | OptOwnIpReference | An IP address of this unit. |
port | PortNumber | A port number of the IP address. |
failover.iface_ref_hosts
Corresponding setting in web GUI: Reference Hosts on page Reference Hosts
Table type: Dynamic
A list of reference hosts for the failover team.
Field Name | Field Type | Explanation |
address | DnsDynIpOtherHost | The IP address of the reference host. |
interface | InterfaceSel | The interface to which the reference host is |
|
| connected. |
fent.always_fent
Corresponding setting in web GUI: Always use NAT traversal on page Remote SIP Connectivity
Table type: Single row
Field Name Field Type | Explanation |
fent_always_fent_exceptions
Corresponding setting in web GUI: Unconditioned NAT Exceptions on page Remote SIP Connectivity
Table type: Dynamic
Field Name Field Type | Explanation |
fent_always_fent_interfaces
Corresponding setting in web GUI: Unconditioned NAT Interfaces on page Remote SIP Connectivity
Table type: Dynamic
Field Name Field Type | Explanation |
fent.fent
Corresponding setting in web GUI: Remote NAT traversal on page Remote SIP Connectivity
Table type: Single row
Turn the SIP NAT Traversal on or off.
243