Chapter 11. SIP Traffic
Request-URI
Select a matching
Action
Select actions for this request. The Telecommuting Module can do the following:
Forward: The request is sent to the destination selected under Forward To.
Auth: The Telecommuting Module asks the requestor for authentication.
ENUM: The Telecommuting Module performs an ENUM lookup to get the new destination.
Allow: The Forward To column is ignored and the request is processed according to the Telecommuting Module settings outside the Dial Plan table.
Reject: The request is rejected. The Telecommuting Module sends a 403 (Forbidden) re- sponse.
A lot of combinations of the above actions are available in the
When neither the Advanced SIP Routing or the SIP Trunking module has been installed, this column only offers a limited number of options.
Forward To
Select a Forward To pattern, created in the Forward To table;
Add Prefix
Sometimes, you might want to add something to a
This column is only available when the Advanced SIP Routing or the SIP Trunking module has been installed.
ENUM Root
If ENUM should be performed for this request, you must select an ENUM Root. Select from the roots created in the ENUM Root table.
This column is only available when the Advanced SIP Routing or the SIP Trunking module has been installed.
Time Class
For each rule you select a Time class, which regulate on what days and at what time of a day the rule will be active. Inactive rules are ignored when deciding what should be done with the incoming SIP signaling. You define the different time classes on the Time Classes page under SIP Traffic.
This column is only available when the Advanced SIP Routing or the SIP Trunking module has been installed.
201