HP VCX Software manual How To Configure Advanced SIP

Chapter 5. How To Configure Advanced SIP

If regular expressions were used, you only need one line per PBX. As the expressions were designed to match calls from both operators, you don’t need to select an operator here.

Finally, go to the Save/Load Configuration page under Administration and apply the new settings by pressing Apply configuration.

How To Use RADIUS Accounting with 3Com VCX IP Telecommuting Module

This is how to configure your Telecommuting Module to use RADIUS Accounting for calls to or from local users.

If you are only interested in accounting for calls to other domains, you only have to turn the RADIUS Accounting on.

If you want to bill for local calls too, you will have to force the users to go via the Telecom- muting Module even when they are both on the same side. For this, the Telecommuting Module will have to act as a back-to-back user agent (B2BUA) for all calls.

This feature is only available when the Advanced SIP Routing or the SIP Trunking module has been installed.

First, define the RADIUS server to receive accounting ticks. This is done on the RADIUS page. If the RADIUS server should only be used for accounting, you can enter any port number in the table. The Telecommuting Module will use port 1813 for accounting.

If you use the Telecommuting Module as the SIP registrar, and the RADIUS server should be used for SIP authentication as well, you need to enter the port number on which the

70