Chapter 15. Command Line Reference |
| |
Field Name | Field Type | Explanation |
lcp_echo_interval OptPositiveSysInteger | Keep alive packet interval (seconds). | |
logclass | FirewallLogclassReferenceThe log class to use for PPPoE negotiations. | |
password | OptPassword | The PPPoE password. |
service | OptNonWhiteString | The PPPoE service. |
user | OptNonWhiteString | The name of the PPPoE user. |
network.route_test_servers
Corresponding setting in web GUI: Gateway Reference Hosts on page Default Gateway
Table type: Dynamic
A list of reference servers to use when determining if a default gateway is alive.
Field Name | Field Type | Explanation |
server | DnsIpAddress | The reference server to use. |
network.routes
Corresponding setting in web GUI: Main Default Gateways, Static Routing on pages Default Gateway and Interface (Network Interface 1 and 2)
Table type: Dynamic
A list of static routes for networks not directly connected to the Ingate.
Field Name | Field Type | Explanation |
destination | RouteDestination | The routed network. |
gateway | DnsDynIpAddress | The router to use for this network. |
interface | InterfaceSel | The interface where the router is located. |
priority | RoutePriority | The priority of the gateway. |
network.vlans
Corresponding setting in web GUI: Named VLANs on page VLAN
Table type: Dynamic
A list of VLANs used on the different interfaces.
Field Name | Field Type | Explanation |
interface | InterfaceSel | The interface on which the VLAN is |
|
| defined. |
name | Name | A name of the VLAN. It is used to refer to |
|
| this VLAN. |
vlanid | VlanId | The id of this VLAN. |
262