HP VCX Software manual Network.interfaces, Network.localnets, Network.pppoe

		Chapter 15. Command Line Reference
Field Name	Field Type	Explanation
address	DnsIpAddress	The IP address to use.
interface	InterfaceSel	The interface to which the network is
		connected.
name	Name	A name for this IP address. It is used to
		refer to the IP address.

network.interfaces

Corresponding setting in web GUI: General, Obtain IP Address Dynamically, Speed and Duplex on pages Interface (Network Interface 1 and 2)

Table type: Fixed

Interface settings.

Field Name	Field Type	Explanation
autoneg	autoneg_sel	Set speed and duplex for the interface.
dynip	dynip_client_sel	Select how the IP address is acquired.
enabled	OnOffToggle	Enable the interface.
interface	InterfaceSel	The physical interface.
name	Name	A name for this interface.

network.local_nets

Corresponding setting in web GUI: Directly Connected Networks on pages Interface (Net- work Interface 1 and 2)

Table type: Dynamic

A list of IP networks directly connected to the Ingate, and the Ingate’s IP addresses on these networks.

Field Name	Field Type	Explanation
address	DnsIpNetwork_Interface	The IP address of the interface, and the
		netmask of the network.
interface	InterfaceSel	The interface to which the network is
		connected.
name	Name	A name for this IP address. It is used to
		refer to the IP address.
vlanid	OptVlanId	The VLAN associated with the network.

network.pppoe

Corresponding setting in web GUI: PPPoE on page PPPoE

Table type: Single row

PPPoE settings.

261