HP VCX Software manual Remote SIP Connectivity, Interoperability

Chapter 4. How To Configure SIP

Remote SIP Connectivity

If you have remote SIP clients behind other NAT boxes, you need to activate Remote NAT Traversal.

Interoperability

You need to set the URI Encoding settings on the Interoperability page to "Use shorter, encrypted URIs".

You need to enter the public IP that corresponds to the Telecommuting Module under Pub- lic IP address for NATed Telecommuting Module. This will make the Telecommuting Module able to rewrite outgoing SIP packets properly.

Save/Load Configuration

Finally, go to the Save/Load Configuration page under Administration and apply the new settings by pressing Apply configuration.

52