HP VCX Software manual Dial Plan, From Header

Chapter 11. SIP Traffic

as $1, and user, which is referred to as $2. You can always refer to the entire Request-URI with $0.

By adding the parameter ";b2bua" at the end of the expression, you force the request to the Telecommuting Module back-to-back user agent, which will make it stateful for all requests. This can be useful if you want the Telecommuting Module to send RADIUS accounting tickets for all calls.

This column is only available when the Advanced SIP Routing or the SIP Trunking module has been installed.

Delete Row

If you select this box, the row is deleted when you click on Create new rows or Save.

Create

Enter the number of new groups and rows you want to add to the table, and then click on Create.

Dial Plan

Here, you create the actual Dial Plan. For each line, select a From entry and Request-URI to match. Then select an Action and, optionally, a Forward to entry to define how the matching requests should be handled by the Telecommuting Module.

You may define lines without a Forward to definition. This is useful if you for example are forwarding by ENUM.

No.

This is a number that is used to identify each individual Dial Plan rule. Rules are sorted in numerical order. To move a rule to a certain row, enter the number on the row to which you want to move it. You need only renumber rules that you want to move; other rules are renumbered automatically. When you click on Save or add a new row, the rules are re-sorted. The order of the rules is important. Rules are used in the order in which they are displayed in the table; rule number 1 is first.

From Header

Select a matching From header pattern, created in the Matching From Header table;

Selecting "-" means that no restrictions are made on the From header or sending IP address.

This column is only available when the Advanced SIP Routing or the SIP Trunking module has been installed.

200