Chapter5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
5-2
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
Telephony Features Available for the Phone
After you add CiscoUnified IP Phones to Cisco Unified CallManager, you can
add functionality to the phones. Table 5 -1 includes a list of supported telephony
features, many of which you can configure using CiscoUnified CallManager
Administration. The Configuration Reference column lists
Cisco Unified CallManager documentation that contains configuration
procedures and related information.
For more information about using most of these features on the phone, refer to the
Cisco UnifiedIP Phones 7906G and 7911G Guide.
Note Cisco Unified CallManager Administration also provides several service
parameters that you can use to configure various telephony functions. For more
information about service parameters and the functions that they control, refer to
the Cisco UnifiedCallManager Administration Guide.
Table5-1 Telephony Features for the CiscoUnified IP Phone
Feature Description Configuration Reference
Abbreviated dialing A user can configure up to 99 speed-dial
entries. Speed-dial entries that are not
assigned to the speed-dial buttons on the
phone are used for abbreviated dialing.
When a user starts dialing digits, the
AbbrDial softkey appears, and the user can
access any speed-dial entry by entering the
appropriate index.
For more information, refer to the:
•CiscoUnified CallManager
Administration Guide,
Cisco UnifiedIP Phone
Configuration chapter
•CiscoUnified CallManager
System Guide,
Cisco UnifiedIP Phones
chapter
Auto answer Causes the speakerphone to go off hook
automatically when an incoming call is
received. The user can monitor the call
using the speaker but must pick up the
handset to speak to the caller.
For more information, refer to the
CiscoUnified CallManager
Administration Guide, Configuring
Directory Numbers chapter.