Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom | Cause | Solution | |
|
|
| |
No power. | The power cord is disconnected. | Plug the power cord into the wall outlet | |
|
| securely. | |
|
|
| |
The power is on, but the | No disc is loaded. | Insert a disc or tape. (Check that the | |
DVD/VCR Receiver | No tape is loaded. | disc or tape indicator in the display | |
does not work. |
| window is lit.) | |
|
|
| |
No picture. | The TV is not set to receive DVD/VCR | Select the appropriate video input mode | |
| Receiver signal output. | on the TV so the picture from the | |
|
| DVD/VCR Receiver appears on the TV | |
|
| screen. | |
|
|
| |
| TV/VCR mode for DVD/VCR Receiver is | Press the TV/VCR button on the remote | |
| control repeatedly to choose VCR | ||
| set to TV MODE. | ||
| mode. VCR MODE appears in the dis- | ||
|
| ||
|
| play window. | |
|
|
| |
| The video cable is not connected | Connect the video cable securely. | |
| securely. |
| |
|
|
| |
| The connected TV power is turned off. | Turn on the TV. | |
|
|
| |
| The equipment connected with the | Select the correct input mode on the | |
No sound. | audio cable is not set to receive | audio receiver so you can listen to the | |
| DVD/VCR Receiver signal output. | sound from the DVD/VCR Receiver. | |
| The audio cables are not connected | Connect the audio cable securely. | |
| securely. |
| |
|
|
| |
| The power of the equipment connected | Turn on the equipment connected with | |
| with the audio cable is turned off. | the audio cable. | |
|
|
| |
| The audio connecting cord is damaged. | Replace it with new one. | |
|
|
| |
The playback picture is | The disc is dirty. | Clean the disc. | |
poor. |
|
| |
Tape heads are dirty. | Clean video heads. | ||
| |||
| Tape is a rental or was recorded on | Use CH/TRK (v/V) for manual tracking | |
| another VCR. | adjustment while tape is playing. | |
|
|
| |
The DVD/VCR Receiver | No disc is loaded. | Insert a disc or tape. (Check that the | |
does not start playback. | No tape is loaded. | disc or tape indicator in the display | |
|
| window is lit.) | |
|
|
| |
| An unplayable disc is inserted. | Insert a playable disc. (Check the disc | |
|
| type, color system, and Regional code.) | |
|
|
| |
| The disc is placed upside down. | Place the disc with the playback side down. | |
|
|
| |
| The disc is not placed within the guide. | Place the disc on the disc tray correctly | |
|
| inside the guide. | |
|
|
| |
| The disc is dirty. | Clean the disc. | |
|
|
| |
| The Rating level is set. | Cancel the Rating function or change | |
|
| the rating level. | |
|
|
|
40
