Troubleshooting (Continued)

Symptom

Cause

Correction

 

 

 

Severe hum or noise is

The plugs and jacks are dirty.

Wipe them with a cloth slightly mois-

heard.

 

tened with alcohol.

 

 

 

 

The disc is dirty.

Clean the disc.

 

 

 

 

The speakers and components are

Connect the speakers and components

 

connected poorly.

securely.

 

 

 

 

The DVD/VCR Receiver is located too

Move your TV away from the audio

 

close to the TV.

components.

 

 

 

Radio stations cannot

The antenna is positioned or connected

Connect the antenna securely.

be tuned in.

poorly.

 

 

 

 

 

 

Adjust the antennas and connect an

 

 

external antenna if necessary.

 

 

 

 

The signal strength of the stations is too

Tune in the station manually.

 

weak (when tuning in with automatic

 

 

tuning).

 

 

 

 

 

No stations have been preset or preset

Preset the stations (page 38).

 

stations have been cleared (when

 

 

tuning by scanning preset stations).

 

No sound from DIGITAL

DVD/VCR Receiver source is not set to

Select OPTICAL by pressing AUX.

AUDIO IN (OPTICAL).

DIGITAL AUDIO IN (OPTICAL).

 

The remote control

The remote control is not pointed at the

Point the remote control at the remote

does not work properly.

remote sensor of the DVD/VCR

sensor of the DVD/VCR Receiver.

 

Receiver.

 

 

 

 

 

The remote control is too far from the

Operate the remote control within 23 ft

 

DVD/VCR Receiver.

(7 m).

 

 

 

 

There is an obstacle in the path of the

Remove the obstacle.

 

remote control and the DVD/VCR

 

 

Receiver.

 

 

The batteries in the remote control are

Replace the batteries with new ones.

 

exhausted.

 

 

 

 

 

This remote control uses same buttons

When using the VCR, first press the

 

for VCR and DVD (ex. PLAY).

VCR button. When using the DVD, first

 

 

press the DVD button.

 

 

 

 

 

 

Moisture Condensation

Moisture condensation can occur:

In locations where moisture condensation may occur:

 

 

 

 

When the DVD/VCR Receiver is moved from a cold

Keep the DVD/VCR Receiver plugged into an AC

 

place to a warm place.

 

power outlet with POWER On. This will help prevent

Under extremely humid conditions.

 

condensation.

 

 

 

 

When condensation has occurred, wait a few hours

 

 

 

for the DVD/VCR Receiver to dry before using it.

 

 

 

 

42

Page 42
Image 42
Zenith XBS344 warranty Symptom Cause Correction, Moisture Condensation