English

 

Français

 

 

8. Operation

8. Fonctionnement

 

 

 

 

 

The blade can bounce away from material being cut if the blade is fed faster than its cutting capability.

f. Cut only from your right to your left. g. Keep your path of advance clear of

material that has been cut and other debris.

3.How you can maintain the best control:

a. Keep a good, firm grip on the unit with both hands. A firm grip can help neutralize bounce. Keep your right and left hands completely around the respective handles.

b. Keep both feet spread apart in a comfortable stance and yet braced for the possibility that the unit could bounce. Do not overreach. Keep firm footing and balance.

■LINE HEAD USAGE

WARNING

1.Always wear eye protection such as safety goggles. Never lean over the rotating cutting head. Rocks or other debris could be thrown into eyes and face and cause serious personal injury.

2.Keep the debris guard attached in place at all times when the unit is operated.

TRIMMING GRASS AND WEEDS

•Always remember that the TIP of the line does cutting. You will achieve better results by not crowding the line into the cutting area. Allow the unit to trim at its own pace.

d. Maintenir la lame bien affûtée. Une lame émoussée augmente les chances de coups de recul.

e. Eviter de plonger la lame trop rapidement dans la broussaille. La lame peut rebondir si elle est enfoncée trop rapidement dans la végétation.

f. Ne couper que de droite à gauche. g. Ne couper que dans les endroits

dépourvus d’herbe déjà coupée ou d’autre sorte de débris.

3.Comment conserver le meilleur contrôle de la machine :

a.Tenir la machine fermement des deux mains. Le fait de la tenir le plus fermement possible peut éviter les coups de recul. Il faut bien saisir les poignées.

b.Se tenir de manière très stable, les pieds légèrement écartés et prêt à l’éventualité d’un coup de recul. Limiter sa contre-réaction. Garder l’équilibre et une bonne assise.

■UTILISATION DE LA TETE DE COUPE A FIL

AVERTISSEMENT

1.Toujours se protéger les yeux en portant des lunettes de sécurité. Ne jamais se pencher vers la tête de coupe. Des pierres ou autres débris risquent d’être projetés au visage et dans les yeux et causer de sérieuses blessures.

2.Le cache anti-projection doit être en place chaque fois que la machine est utilisée.

COUPE DE GAZON OU D’HERBES

•Il ne faut pas oublier que c’est l’extrémité du fil qui coupe. Ne pas l’engager trop rapidement la tête de coupe dans l’herbe à couper. Laisser la machine couper à son propre rythme.

1.Hold the unit so the head is off the ground and is tilted about 20 degrees

1.Tenir la machine de manière à ce que la tête de coupe à fil ne touche pas le

42

Page 41 Page 43
Page 42
Image 42
Zenoah BC535DLM, BC535DWM manual Line Head Usage, Trimming Grass and Weeds, Utilisation DE LA Tete DE Coupe a FIL
Page 41 Page 43

BC535DWM, BC535DLM specifications

The Zenoah BC535DLM and BC535DWM are cutting-edge brushcutters designed for both professional landscapers and gardening enthusiasts. They embody a perfect blend of power, efficiency, and user-friendly features that make them stand out in the competitive market of outdoor tools.

At the heart of these brushcutters is a robust 53cc, two-stroke engine that delivers impressive performance while maintaining low emissions. This power source allows users to tackle a variety of cutting tasks, from thick brush to dense undergrowth, with ease. The BC535DLM is particularly noted for its lightweight design, making it an ideal choice for lengthy jobs without causing significant fatigue.

One of the standout features of the Zenoah BC535DLM and BC535DWM is their advanced Anti-Vibration System. This technology significantly reduces vibration during operation, enhancing user comfort and control. The ergonomic handle design further complements this feature, allowing for prolonged usage without discomfort. Both models also include a multi-function control handle, which provides easy access to throttle and stop controls, improving the overall user experience.

The BC535DWM model, designed for a more demanding professional use, comes equipped with a high-efficiency cutting head. This feature is optimized for heavier-duty applications, ensuring that operators can effortlessly transition from lighter grasses to tougher weeds. Additionally, the BC535DWM supports a wider variety of accessories, helping professionals adapt their tools to multiple tasks easily.

Fuel efficiency is another hallmark of the Zenoah brand, as both models are designed to maximize runtime without compromising power. The fuel tank capacity allows for extended operation, minimizing downtime during larger landscaping projects. Furthermore, Zenoah's commitment to eco-friendly technologies means that both units are engineered to comply with stringent emission standards, making them a responsible choice for environmentally conscious users.

Durability and reliability are critical considerations in the design of the Zenoah BC535DLM and BC535DWM. These brushcutters are built with high-quality materials to withstand tough working conditions, ensuring long-lasting performance. Maintenance is straightforward, allowing users to keep their equipment in peak condition with minimal effort.

In summary, the Zenoah BC535DLM and BC535DWM brushcutters combine powerful engines, innovative technologies, and user-centric designs, making them ideal for a range of landscaping tasks. Whether you are a professional searching for dependable equipment or a hobbyist looking to enhance your gardening experience, these models offer a compelling solution with superior performance and comfort.
Top Page Image Contents