Zenoah CHTZ2401-CA, CHTZ2401L-CA manual OP51 OP6, Operation, English

English

7. Operation

OP5(1)

OP6

(1)

■STOPPING ENGINE (OP3)

1.Release the throttle lever and run the engine for a half minute.

2.Shift the ignition switch to the “STOP” position.

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

IMPORTANT

RUNNING IN THE ENGINE

•During the first 20 working hours, do not use the hedge-trimmer at maximum power for long periods.

■ADJUSTING IDLING SPEED

•Before adjusting the carburetor, clean the air filter and warm up the engine. (OP5)

(1) air filter

•Idle screw is adjusted in order to ensure a good safety margin between idle running and clutch engagement. (OP6)

(1) Idle screw

WARNING

With the engine idling (3000 rpm), the blade should not rotate. We recommend that you have the dealer or an authorised mechanic carry out any carburetor adjustments.

WARNING

•Weather conditions and altitude may effect carburation.

•Do not allow anyone to stay close to the hedge- trimmer while working or while adjusting the carburetor.

26