OP7
OP8
English
7. Operation
■HOW TO USE
HANDLE (CHTZ2401/CHTZ2401-CA only)
To reduce fatigue when trimming hadges, the handle can be swivelled through 90° to the left or right. (OP7, OP8).
Do not press the throttle during this operation !
Proceed as follows:
1.Free the handle by pressing the locking lever; (OP7)
2.Turn the handle until the locking lever clicks into place;
3.When the handle is locked in its new position, you can apply the throttle again.
(1)handle
(2)locking lever
You can swivel the handle even with the engine idling because the
28
