MA7

English

8. Maintenance

REDUCTION GEARBOX

Refill gear housing every 50 working hours (MA7). Use greese pump. Feed greese until it comes out of the base of blades.

PROCEDURES TO BE PERFORMED AFTER

EVERY 100 HOURS OF USE

1.Tighten all screws, bolts, and fittings.

2.Check to see if any oil or grease has worked its way in between the clutch lining and drum, and if it has wipe it away using oil-free, lead-free gasoline.

English

9. Storage

1.Oil the blade to prevent rust.

2.Empty the fuel tank and put the cap back on.

3.Remove the spark plug, pour a small amount of oil into the cylinder.

4.Rotate the crankshaft several times using the starting rope in order to distribute the oil. Put the spark plug back in.

5.Wrap the engine with a plastic sheet.

6.Store the trimmer in a dry place, preferably not in direct contact with the floor and away from heat sources.

English

10. Disposal

When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations.

38

Page 38
Image 38
Zenoah CHTZ2401-CA manual Storage, Disposal, Reduction Gearbox, Procedures to be Performed After Every 100 Hours of USE