5. Set up

WARNING

Assemble each part correctly. Wrong assembly might cause an accident.

If you cannot do the assembling yourself, consult the shop where you bought this product.

ENGINE

Using attached 4 socket screws, secure the connection firmly with equal force.

SE1

CONNECTING SWITCH WIRES

Connect the switch wires between the engine and the main unit.

SE4

INSTALLING DEBRIS GUARD

1.Fit the guard skirt on debris guard.

2.Attach the debris guard with the bolts provided to the pipe.

HANDLE

1.Loosen the 4 bolts on the upper cap and insert the handles equally. Retighten the bolts.

2.Put the handle assembly into the bracket and put the upper cap over it. Tighten the cap securely.

SE2

CONNECTING THROTTLE WIRE

1. Remove the air cleaner cover.

2. Connect the end of the throttle wire to the joint on the top of the carburetor.

SE3

1.2.

SE5

Guard skirt

for line head only

INSTALLING LINE HEAD

1.While locking the gear shaft by inserting the hexagonal bar into the holder A on the gear box, loosen and remove the nut (left-handed) and holder B.

2.Fit the line head assembly to the gear shaft. Tighten it securely by hand.

SE6

(1) Hexagonal

 

bar

 

(2) Holder A

 

(3) Holder B

 

 

9

Page 9
Image 9
Zenoah KAM-402 owner manual Set up