SE1

SE2

English

6. Set up

INSTALL THE HANDLE

1.Remove both screws from the handle.

2.While spreading the handle at the mounting hole, position the handle on the outer tube as shown.

3.Reinstall the two mounting screws in the handle, but do not tighten them at this time.

NOTE

One side of the handle is recessed to receive the hex nuts.

4.Locate the handle at the best position for operator comfort (usually about 10inches (25cm) ahead of the throttle lever), and secure it by tightening the knob at the handle base.

SWEEPER ASSEMBLY (SE2)

1.Push one of the drum axles onto either of the two gearcase output shafts. If necessary, rotate the drum axle until the clevis pin hole in the axle aligns with the matching hole in the gearcase output shaft.

2.Use a clevis pin and hitch pin to secure the drum axel to the shaft.

3.Slide the recessed end of a sweeper drum assembly over the assembled axle, and then push the drum down the axel until it bottoms at the clevis pin.

(1)Clevis Pin

(2)Hitch Pin

(3)Cotter Pin

(4)Drum Axle

(5)Drum Assembly

IMPORTANT

The two drum assemblies are identical, but each drum must be installed with its recessed end facing toward the gearcase.

4.Use a cotter pin to secure the drum assembly on the axle (see inset) . The cotter pin is designed to fit tightly against the outboard end of the drum, so you may need to compress the drum face slightly during installation.

5.Repeat Steps 1-4 to install the remaining axle and drum assembly.

18

Page 18
Image 18
Zenoah RMSZ2601-CA, RMNBZ2601-CA manual Set up, SE1 SE2, Install the Handle, Sweeper Assembly SE2

RMSZ2601-CA, RMNBZ2601-CA, RMNBZ2601, RMSZ2601 specifications

The Zenoah RMSZ2601, RMNBZ2601, RMNBZ2601-CA, and RMSZ2601-CA are advanced, high-performance engines designed for professional use in various applications, particularly in the realms of landscaping, agriculture, and industrial equipment. Known for their reliability and durability, these engines are engineered to meet the rigorous demands of both commercial and residential users.

One of the standout features of these models is their two-stroke engine design, which allows for a higher power-to-weight ratio compared to four-stroke engines. This lightweight construction makes the Zenoah engines easier to maneuver and operate in tight spaces without sacrificing power. The RMSZ2601, for instance, boasts a displacement of 26 cc, delivering impressive torque and efficiency, making it suitable for a range of tasks from trimming to industrial drives.

Another key characteristic of these engines is their advanced ignition system, which enhances starting ease and operational stability. The incorporation of Zenoah’s unique digital ignition technology ensures a quick start and consistent performance across varying conditions. Additionally, these engines are equipped with an anti-vibration system that minimizes operator fatigue, enabling extended use without discomfort.

The RMNBZ2601 and its variants are also designed with an emphasis on reduced emissions. The CA models incorporate catalytic converters to meet stringent environmental regulations, making them a responsible choice for users conscious of their ecological footprint. This not only helps comply with governmental standards but also contributes to a cleaner working environment.

Moreover, Zenoah emphasizes user-friendly features in their engine designs. Both the RMSZ2601 and RMNBZ2601 models feature easy-access fuel and oil tanks that simplify refueling and maintenance. The filters are conveniently positioned for straightforward cleaning and replacement, ensuring longer operational life and reliability.

Durability is a hallmark of the Zenoah brand. The engines are constructed with high-grade materials that withstand the rigors of heavy-duty use. This ensures that the RMSZ2601, RMNBZ2601, and their variants maintain peak performance over time, even under challenging operating conditions.

In summary, the Zenoah RMSZ2601, RMNBZ2601, RMNBZ2601-CA, and RMSZ2601-CA represent cutting-edge technology in the small engine market, delivering robust performance, low emissions, and reliability. These features make them ideal choices for professionals in landscaping, agriculture, and other demanding sectors.