Zephyr ALA - M90AWX, ASU - M90ASX, ASU - E42ASX, AED - M90ASX, ALA - E42ABX, ALA - E42AWX, ALA - M90ABX

www.zephyronline.com

Installation - External & In-Line Blower Preparation

The following instructions are for preparing the hood for use with an ex- ternal or in-line blowers models CBE-1000 or PBN-1000A.

CAUTION: To reduce the risk of fire and electric shock, install this rangehood only with remote blowers rated maximum 6.2 A.

For internal blower instructions please turn to page 16.

1. Remove the (6) screws securing the blower pla- te to the blower housing and remove blower plate. See.Fig.1

2. Detach rectangular metal plate from blower plate. See Fig. 2A Flip blower plate 90 degrees and attach rectangular plate to blower plate side with round knock-out.See Fig.2B

3. Re-install blower plate into blower housing by following reverse instructions from step 1 then use the screws provided to complete installa- tion. (Tot.14 type B)

4. Remove top knock-out plate and remote blower knock-out plate by using a flat head screwdriver. See Fig. 3 and Fig. 4

5. Secure 8” round blower collar to top of blower housing using (4 type B) screws. See Fig. 5

- 18 -