www.zephyronline.com

CONTROLS

Use the high suction speed in cases of concentrated kitchen vapours. It is recommended that the cooker hood suction is switched on for 5 minutes prior to cooking and to leave in operation during cooking and for another 15 minutes approximately after terminating cooking.

Description of control ball and hood operation

The control ball is also a light signal:

No signal :

The hood is switched off.

Static green light :

Hood is switched on at power level 1 (minimum).

Static orange light :

Hood is switched on at power level 2 (medium).

Static red light :

Hood is switched on at power level 3 (maximum).

Flashing red light :

Hood is switched on boost mode (timed at 5 minutes)

Flashing green light :

Indicates the grease filter saturation - clean the grease filter

Flashing orange light :

Indicates the charcoal filter saturation - clean or replace the charcoal filter. Attention!

The control ball flashes orange to indicate the saturation of the charcoal filter even if the hood is used in the extraction mode and no charcoal filter is fitted.

In this case, perform the signal reset operation as follows: select the boost mode (the control ball lights up with a red flashing light), press again and hold pressed for about 3 seconds until an audible signal indicates the reset has taken place.

Reset filter saturation signal

Green or orange flashing light

Proceed as follows:

Select the boost mode (the control ball switches on with flashing red light), depress again and hold for 3 about seconds until the beep sound indicating that reset has occurred.

Switching on the cooker hood

The control ball is a balance wheel switch.

Depressing the control ball towards the right repeatedly switches on the cooker hood and all the suction speed selections up to the boost mode, depressing again towards the right the cooker hood switches off.

Turning on the light

Depress the control ball towards the left: once for dim lighting,

pressing again for full lighting, pressing again switches the light off.

Description of the hood - Control Ball

15

Page 15
Image 15
Zephyr EBO-E36ASX manual Description of the hood Control Ball, Controls, Description of control ball and hood operation

EBO-E42ASX, EBO-E36ASX specifications

The Zephyr EBO-E36ASX and EBO-E42ASX are advanced cooling solutions designed for commercial applications where energy efficiency, performance, and reliability are paramount. Both models offer superior features tailored for various industries, making them reliable choices for those seeking quality and durability in air conditioning technology.

One of the standout features of the EBO-E36ASX and EBO-E42ASX is their inverter-driven compressor technology. This innovation allows the units to adjust the compressor speed according to the cooling load, ensuring optimal performance while minimizing energy consumption. As a result, these models achieve higher Seasonal Energy Efficiency Ratios (SEER), significantly reducing electricity bills while also contributing to a more sustainable environment.

Both units are equipped with advanced air filtration systems. These systems incorporate multi-layer filters designed to capture airborne particulates, allergens, and pollutants. This feature not only enhances indoor air quality but also contributes to a healthier working environment, making the EBO models well-suited for offices, schools, and hospitals. The filters are easy to access and can be replaced or cleaned without hassle.

In terms of design, the EBO-E36ASX and EBO-E42ASX units come with compact dimensions, allowing for versatile installation options. They can be mounted in various orientations, fitting seamlessly into a range of architectural layouts. The exterior casing is crafted from durable materials, ensuring that the units withstand harsh weather conditions and maintain their aesthetic appeal over time.

Moreover, both models feature a quiet operation mode, a crucial aspect for environments where noise reduction is essential. Utilizing sound-dampening technologies, these units operate at low noise levels, contributing to a comfortable atmosphere in offices, restaurants, and homes.

Integration with smart home technologies is another remarkable characteristic of the EBO-E36ASX and EBO-E42ASX. They are compatible with various smart thermostats and can be controlled remotely through mobile applications. This feature enables users to monitor and adjust settings, ensuring optimal indoor comfort while maximizing energy efficiency.

Overall, Zephyr's EBO-E36ASX and EBO-E42ASX represent a blend of cutting-edge technology, efficient performance, and user-friendly design. Their commitment to energy efficiency, air quality, and quiet operation makes them exemplary options for those looking to enhance their indoor environments. With these models, Zephyr continues to push the boundaries of HVAC technology, ensuring comfort and sustainability in commercial and residential applications alike.