computer, you also have the option of connecting to your computer’s USB port. However, we recommend that Windows users connect to an Ethernet jack if one is available.
¾If you are using a computer’s Ethernet port: Plug one end of the Ethernet cable into the modem’s ETHERNET LAN port and plug the other end into your computer’s Ethernet port.
¾If you are using a Windows computer’s USB port: Plug one end of the USB cable into the modem’s USB port and the other end into your computer’s USB port.
¾If you are connecting the X4 directly to a hub, switch, wireless access point, or other network device: Plug one end of the Ethernet cable into the modem’s ETHERNET port and the other end into the network device’s Ethernet jack (which is typically called an Uplink or Expansion port).
The modem’s ETHERNET LAN or USB connector is at the back of the modem.
Tip: Windows users can connect two computers to the X4, one on the Ethernet jack and the other on the USB port, and share Internet access.
3 Plug the power cube into a power strip or wall outlet and then plug the power cube’s other end into the modem’s POWER jack.
Important!
Use only the power cube shipped with the X4. Other power cubes may damage your hardware.
After you plug in the power cube, the POWER light on the front panel of the modem should become steady on, and the
10 | ADSL X4 User Guide |