3 Enter the appropriate information on the WAN Configuration page. Use the table below as a guide.

For this setting…

Do this…

 

Current

Select Enabled from the drop-down list.

Connection

(That is, click the arrowhead

at the

 

far right of the box to view the items in

 

the list, then select Enabled.)

 

Encapsulation

Select your service provider’s

 

 

Encapsulation setting from the

 

 

drop-down list.

 

VPI and VCI

Enter the VPI and VCI settings for your

 

service provider. (If you do not know

 

these settings, refer to the ADSL

 

 

Internet Settings Tables on page 41.)

Bridge and IGMP

Ensure that Disabled is selected from

 

both drop-down lists.

 

IP Address and

Enter the values assigned to you by your

Subnet Mask

service provider for each.

 

Use DHCP

Ensure that the Disabled option button is

 

selected.

 

Default Route

Ensure that Enabled is selected from the

 

drop-down list.

 

Gateway IP

Enter the value assigned to you by your

Address

service provider.

 

Use DNS

Ensure that the Disabled option button is

 

selected.

 

Primary DNS

Enter the value assigned to you by your

Server

service provider.

 

Secondary DNS

If your service provider gave you a

Server

second DNS server address, enter it.

4

5

Click Save Changes on the WAN Configuration page.

You are redirected automatically to the Basic Setup page. Click Write Settings to Flash.

20

ADSL X4 User Guide