Restoring Default Settings

If you have changed the system settings on your X4 and for some reason want to restore them to the factory default settings, you can do so in one of two ways: You can perform a software reset or a hard reset.

To reset using the X4’s Web interface

If you can open your Web browser and access your X4’s user interface, do the following to perform a software reset:

1 Log into the Zoom Configuration Manager and click the Advanced Setup icon to open the Advanced Setup page. (See page 12 if you need help logging in.)

2

3

In the Administration section, click the Reboot button.

From the Reboot Mode drop-down list, select Reboot From Default Configuration.

4 Click the Reboot button. Once this process is complete, your unit is reset to its factory settings.

To perform a hard reset

If you lose your link to the unit and cannot communicate with it via the Web browser, do the following to perform a hard reset:

1 Insert a paper clip into the RESET pinhole in the center of the modem’s back panel.

2 Hold it there for five seconds. The unit’s DSL light will turn off and then it will blink slowly, about once per second.

You are now guaranteed that all system settings are restored to the X4’s factory defaults.

39