Zoom X6v VoIP manual SIP Response Codes, SIP Distinctive Ring Names

Parameter	Description	Default
NAT Keep Alive Enable	Send periodic SIP messages to keep port	Enabled
	mapping active
NAT Keep Alive Interval (s)	Periodic interval for SIP keep alive	15
	messages (in seconds)
NAT Keep Alive Domain Name	Fully qualified domain name (including an
	optional port number) for the destination
	of SIP keep alive message (sends to the
	proxy server if blank)
NAT Keep Alive Message	Type of message to be sent as SIP keep
	alive: empty, notify or register

SIP Response Codes

Parameter	Description	Default
SIP Response Code SIT1	SIP response code which plays the SIT1	0
	tone sequence
SIP Response Code SIT2	SIP response code which plays the SIT2	0
	tone sequence
SIP Response Code SIT3	SIP response code which plays the SIT3	0
	tone sequence
SIP Response Code SIT4	SIP response code which plays the SIT4	0
	tone sequence
SIP Response Code Try Backup	SIP response code to use backup server	0
SIP Response Code Retry	SIP response code to retry the	30
Registration	registration

Note: The range for the SIP Response Codes is 0 through 65535. However, the SIP Response Codes are not implemented.

SIP Distinctive Ring Names

Parameter	Description	Default
01	Telephone event name to produce distinctive ring pattern 1	Belcore-r1
02	Telephone event name to produce distinctive ring pattern 2	Belcore-r2
03	Telephone event name to produce distinctive ring pattern 3	Belcore-r3
04	Telephone event name to produce distinctive ring pattern 4	Belcore-r4
05	Telephone event name to produce distinctive ring pattern 5	Belcore-r5
06	Telephone event name to produce distinctive ring pattern 6	Belcore-r6
07	Telephone event name to produce distinctive ring pattern 7	Belcore-r7
08	Telephone event name to produce distinctive ring pattern 8	Belcore-r8

22 X6v VoIP Features Technical Reference