ZyXEL Communications 2864I user manual Default Dial-In Setup for Bridge, Bridge Static Route Setup

Once you have completed filling in the Network Layer Options Menu, press ENTER to return to Menu 11. Press ENTER at the message: Press ENTER to Confirm ... to save your selections, or press ESC at any time to cancel your selections.

Default Dial-In Setup for Bridge

There is only one parameter you need to fill out for Bridging applications.

∙PPP Options: Recv. Authen. - verify that this field is not set to None Bridging applications must have some sort of authentication turned on in order to match to a Remote Node.

Once you have completed filling in the menu, press ENTER at the message: Press ENTER to Confirm ... to save your selections, or press ESC at any time to cancel your selections.

Bridge Static Route Setup

You can configure Bridge static routes for your Bridging applications.

Figure 9-3 Menu 12.4 - Bridge Static Route

1.Route Name - For identification purposes enter a name for the bridge static route.

Bridging Configuration 91