ZyXEL Communications 2864I ∙ 64 - Only one channel will be used, Remote Node Configuration

4.Multiple Link Options: Base Trans Rate - Select the base data transfer rate for this Remote Node. This parameter is in kilobits per second (Kbps). There are two options for this field:

∙64 - Only one channel will be used.

∙128 - Two channels will be used when a packet triggers a call.

5.Multiple Link Options: Max Trans Rate - Enter the maximum data transfer rate allowed for this Remote Node. This parameter is in kilobits per second. There are two options for this field:

∙64 - At most one channel can be used.

∙128 - A maximum of two channels can be used.

6.Multiple Link Options: Target Utility - Enter the two thresholds separated by a - for subtracting and adding the second channel. The default is 32-48.

7.Multiple Link Options: Add Persist - This parameter specifies the number of seconds there traffic is above the adding threshold before the Prestige will bring up the second channel. The default is 5 seconds.

8.Multiple Link Options: Subtract Persist - This parameter specifies the number of seconds where traffic is below the subtraction threshold before the Prestige drops the second channel. The default is 5 seconds.

Once you have completed Menu 11.2 - Remote Node PPP Options, press ENTER at the message: Press ENTER to Confirm

... to confirm your selections, or press ESC to cancel your selections.

58 Remote Node Configuration