ZyXEL Communications 56K

User's Guide for ZyXEL Omni 56K USB Modem

3-9

Here is an example:

RING

TIME: 04-28 12:30

CALLER NUMBER: 7135551414

CALLER NAME: Tracy Huang

RING

If the caller number and name are not available, the ring message appears as follows:

RING

TIME: 04-28 12:30

REASON FOR NO NUMBER: OUT_OF_AREA

REASON FOR NO NAME: PRIVACY

RING

The last CND message that the modem received can be displayed by using the AT*T

command.

Setting S48.0=1 causes the modem to report CND information in its ASCII coded hexadecimal

raw data format. The DTE software is responsible for explaining the data.

NOTE: Please refer to the Bellcore Technical Advisory

document TR-NWT-000030 for the exact data format. The above

Caller ID scheme applies to the North America area. Different

countries may employ different Caller ID schemes, check if the

scheme used in your country is supported before using the Caller

ID feature. For most other Caller ID schemes, only the Caller

telephone number is provided.

Contents

Main ZyXEL ZyXEL Omni 56K USB Modem Page Page Limited Warranty ZyXEL Omni 56K USB Modem Become a Registered Owner User's Guide for ZyXEL Omni 56K USB Modem vi Customer Support Table of Contents Page List of Tables Page Page Page Preface Page Chapter 1 Introduction 1.1 Main Features Page Chapter 2 2.1.2 Back Panel Page Page Chapter 3 Specifications and Functional Description 3.1 Specifications 3.1.1 Hardware Specification 3-2 3.1.2 Firmware Specification Table 4. Firmware Specifications 3.2 Protocol Support n Data Physical Layer For more information on detailed command sets, please refer to Chapter 5. . n Fax Physical Layer 3.3 Omni 56K USB Capability The data/fax/voice feature of the Omni 56K USB is described in the following table: Table 5. Data/Fax/Voice Feature Description 3.3.1 Data Function Physical Layer Capability Page Page Page Page Page Page 3.3.2 Security Function Page 3.3.3 Fax Function 3.3.4 Voice Function Page Chapter 4 Result Codes 4.1 Result Codes Page Page Page 5-1 Chapter 5 Command Sets 5.1 Data Command Sets 5.1.1 Basic AT Command Sets Table 10. Basic AT Command Sets 5-2 5-3 5-4 5.1.2 Extended AT& Command Sets Table 12. Extended AT& Command Set 5-5 5-6 5-7 5-8 5.1.3 Extended AT* Command Sets Table 13. Extended AT* Command Sets 5-9 5.1.4 Extended AT# Command Sets 5-11 5.2 Fax Command Sets 5.2.1 Service Class 1 Commands Table 15. Service Class 1 Commands 5-12 Table 17. Command Syntax Table 18. Supported Commands (per TIA PN2388 dated 8/20/1990) 5-13 5-14 Table 19. Class 2 Command Responses 5-15 Class 2 Flow Control 5-16 5.2.3 Service Class 2.0 Commands Table 20. Service Class 2.0 Commands 5-17 User's Guide for ZyXEL Omni 56K USB Modem 5-18 5-19 5.2.4 Voice AT Commands Table 21. Voice AT Commands 5-20 5-21 5.2.5 Voice Shielded DTE Commands Table 22. Voice Shielded DTE Commands 5.2.6 Voice Shielded DTE Responses Table 23. Voice Shielded DTE Responses 5-22 5.3 S-Register Descriptions 5.3.1 Basic S-Registers "ATSn=x" Table 24. Basic S-Registers ATSn=x Table 25. Extended S-Registers "ATSn=x" 5-23 5-24 5-25 5-26 5-27 5-28 5-29 Page Chapter 6 Firmware Upgrade 6.1.1 Upgrading by Software (for Windows 98/NT/2000) 6.1.2 Upgrading by Using a Terminal Program A Glossary AT prefix (ATtention). To send an AT B C D E F G H I J K L Index