ZyXEL Communications manual Users Guide for ZyXEL Omni 56K USB Modem

User's Guide for ZyXEL Omni 56K USB Modem

	Minimum Scan Time/Line	st=0:0 ms
		st=1:5 ms
		st=2:10 ms (normal); 5 ms (fine)
		st=3:10 ms
		st=4:20 ms (normal); 10 ms
		(fine)
		st=5:20 ms
		st=6:40 ms (normal); 20 ms
		(fine)
		st=7:40 ms
+FIS=vr, br, wd, ln, df, ec, bf,	Current Session Negotiating	Same as above.
st	Parameters
+FCS=vr, br, wd, ln, df, ec,	Current Session Parameters	Same as above.
bf, st
+FLI=“string”	Local Facsimile Station ID
	String, TSI/CSI
+FPI=“string”	Local Facsimile Station ID
	String, CIG
+FLP=n	Indicate document available for	N=0:No document
	polling	N=1:A document is available
+FSP=n	Enable/Disable polling	N=0:Disable
		N=1:Enable
+FNR=rpr, tpr, idr, nsr	Negotiation Reporting Enable	Rpr= 0:Receiver parameters are
		not reported.
		Rpr=1:Receiver parameters are
		reported.
		Tpr= 0:Transmitter parameters
		are not reported.
		Tpr=1:Transmitter parameters
		are reported.
		idr= 0:ID Strings are not
		reported.
		idr=1:ID Strings are reported.
		nsr= 0:Non-standard frames are
		not reported.
		nsr= 1:Non-standard frames are
		reported.
+FIE=n	Procedure Interrupt Parameter	n=0:Disable
		n=1:Enable
+FPS=n	Page Transfer Status	n=1:Received page is good.
		n=2:Page is bad; retrain is
		requested.
		n=3:Page is good; retrain is

5-17