User's Guide for ZyXEL Omni 56K USB Modem
5-13
COMMAND DESCRIPTION VALUE
Bit rate: 12000 bit/s; V.17. br=4
Bit rate: 14400 bit/s; V.17. br=5
Page width: 1728 pixels in 215mm. wd=0
Page width: 2048 pixels in 255mm. wd=1
Page width: 2432 pixels in 303mm. wd=2
Page length: A4; 297mm. ln=0
Page length: B4; 364mm. ln=1
Page length: unlimited length. ln=2
Data compression format: 1-D; modified Huffman. df=0
Data compression format: 2-D; modified Read. df=1
Error correction disabled. ec=0
Disable binary file transfer. bf=0
Minimum scan time/line: 0 ms. st=0
Minimum scan time/line: 5 ms. st=1
Minimum scan time/line: 10 ms (normal); 5 ms (fine). st=2
Minimum scan time/line: 10 ms. st=3
Minimum scan time/line: 20 ms (normal); 10ms (fine). st=4
Minimum scan time/line: 20 ms. st=5
Minimum scan time/line: 40 ms (normal); 20ms (fine). st=6
Minimum scan time/line: 40 ms. st=7
+FDCS=vr, br, wd,
ln, df, ec, bf, st Current session parameter; refer to +FDCC command.
+FDIS=vr, br, wd,
ln, df, ec, bf, st Current session negotiation parameter; refer to +FDCC
command.
+FDR Receive phase C data command; initiates document reception.
+FDT=df, vr, wd,
ln Transmit phase C data command: release the DCE to proceed
with negotiation.
End of page or document command:
More pages; same document. n=0
End of document; another document follows. n=1
No more pages or documents. n=2
Procedure interrupt; another page follows. n=4
Procedure interrupt; end of document, another document follows. n=5
+FET=n
Procedure interrupt; end of document. n=6
+FK Regular fax abort command.
+FLID="string" Local ID string parameter.
Flow control options:
No flow control. n=0
Set XON/XOFF software flow control. n=1
+FLO=n
Set CTS/RTS hardware flow control. n=2
Document for polling command:
The DTE has no document available for polling. n=0
+FLPL=n
Indicate a document available for polling. n=1
+FMDL? Request DCE model.
+FMFR? Request DCE manufacturer.