Prestige 794M User’s Guide
Table 1 | Front Panel: LEDs (continued) | |||
|
|
|
|
|
LED |
| COLOR | STATUS | DESCRIPTION |
|
|
|
|
|
LAN 1..4 |
| Orange | On | The Prestige has a successful 10Mbps Ethernet connection. |
|
|
|
|
|
|
|
| Flashing | The 10M LAN is sending or receiving packets. |
|
|
|
|
|
|
| Green | On | The Prestige has a successful 100Mbps Ethernet connection. |
|
|
|
|
|
|
|
| Flashing | The 100M LAN is sending or receiving packets. |
|
|
|
|
|
|
|
| Off | The LAN is not connected. |
|
|
|
|
|
LINE 1, 2 |
| Green | On | The Prestige has a successful SHDSL link. |
|
|
|
|
|
|
|
| Off | The SHDSL link is down or not connected. |
|
|
|
|
|
1.5 Rear Panel
The following figure shows the rear panel of the Prestige.
Figure 6 Rear Panel
The following table describes the ports.
Table 2 Rear Panel
LABEL | DESCRIPTION |
|
|
LAN 1..4 | Connect a computer to this port with an Ethernet cable. This port is auto- |
negotiating (can connect at 10 or 100Mbps) and | |
| adjust to |
CONSOLE | Only connect this port if you want to configure the Prestige via console port. |
| Connect one end of the console cable to the console port of the Prestige and the |
| other end to a serial port (COM1, COM2 or other COM port) on your computer. |
| Your computer should have a terminal emulation communications program (such |
| as HyperTerminal) set to VT100 terminal emulation, no parity, 8 data bits, 1 stop |
| bit, no flow control and 9600 bps port speed. |
LINE 1..2 | Connect to a telephone jack using the included telephone cable. |
|
|
RESET | You only need to use this button if you’ve forgotten the Prestige’s password. It |
| returns the Prestige to the factory defaults. |
| Press this button is for less than three seconds to restart the Prestige. |
| Press this button in for more than six seconds to reset the Prestige to the factory |
| default settings. |
PWR | Connect to a power source using only the included power adaptor for your region. |
|
|
Power Switch | After you’ve made the connections and connect the power adaptor to a power |
| supply, push in the power button to turn on the Prestige. |
25 | Chapter 1 Introduction |