Prestige 794M User’s Guide
Table 31 Firewall: Packet Filter (continued)
LABEL | DESCRIPTION |
|
|
Packet Filter Rules |
|
|
|
Rule Name | This field displays the descriptive name for a rule. |
|
|
Time Schedule | This field displays the time when this rule is active. |
|
|
Source IP/ | This field displays the source IP address and subnet mask. |
Netmask |
|
Destination IP/ | This field displays the destination IP address and subnet mask |
Netmask |
|
Protocol | This field displays the protocol name. |
|
|
Source Port | This field displays the source port number or port number range. |
|
|
Destination Port | This field displays the destination port number or port number range. |
|
|
Inbound | This field displays whether the incoming packets are forwarded (Allow) or dropped |
| (Block). |
Outbound | This field displays whether the outgoing packets are forwarded (Allow) or dropped |
| (Block). |
Edit | Click Edit to modify the settings of the selected filter. |
|
|
Delete | Click Delete to remove the selected filter. |
|
|
6.4.1 Add a New TCP/UDP Packet Filter
To add a new TCP/UDP packet filter, click Add TCP/UDP Filter in the Packet FIlter screen.
Figure 47 Firewall: Packet Filters: Add TCP/UDP Filter
The following table describes the labels in this screen.
Table 32 Firewall: Packet Filters: Add TCP/UDP Filter
LABEL | DESCRIPTION |
|
|
Rule Name | Enter a descriptive name for identification purposes. |
|
|
Time Schedule | Specify the time in which this filter is active. Select Always On to activate the rule |
| all the time. Otherwise select a time you configure in the Time Schedule screen. |
69 | Chapter 6 Firewall |