Prestige 794M User’s Guide
7.3.6 IPSec VPN Configuration
To configure an IPSec VPN connection, click Create in the main IPSec screen.
Figure 59 IPSec: Create
The following table describes the labels in this screen.
Table 44 VPN Rules (IKE): Add Policy
LABEL | DESCRIPTION |
|
|
Connection Name | Enter a descriptive name for identification purposes. |
|
|
Local | Configure the fields to allow one or more than one computer on the LAN to use a |
| VPN connection. |
Single Address | Select Single Address to allow one VPN client with the specified IP address to |
| use the VPN connection. |
| Enter a single IP address in the IP Address field. |
|
|
Subnet | Select Subnet Address to allow more than one computer in the specified |
| subnet to use the VPN connection. |
| Enter the IP address and subnet mask in the IP Address and Netmask fields |
| respectively. |
IP Range | Select IP Range to allow more than one computer in the specified IP address |
| range to use the VPN connection. |
| Enter the starting and ending IP addresses in the IP Address and End IP fields |
| respectively. |
Remote | Configure the fields to allow one or more than one computer on the remote |
| network to use a VPN connection. |
Secure Gateway | Type the WAN IP address or hostname of the remote IPSec router with which |
Address (or | you're making the VPN connection. |
Hostname) |
|
85 | Chapter 7 VPN |