Prestige 794M User’s Guide

Table 26 System: Time Zone

LABEL

DESCRIPTION

 

 

Time Zone

Select Enable to use the time zone settings to set your Prestige system time.

 

Select Disable to deactivate this feature.

 

 

Time Zone List

Specify the order of the Local Time Zone list is to be displayed.

 

Select By City to display the list alphabetically based on the cities for each time

 

zone.

 

Select By Time Different to display the list in ascending order.

 

 

Local Time Zone

Select a time zone from the drop-down list box.

(GMT Time)

Note that world map indicates the current time zone you select.

 

 

 

SNTP Server IP

Enter the IP address or URL of your time server. Check with your ISP/network

Address

administrator if you are unsure of this information.

Daylight Saving

This field is available when you select By City in the Time Zone List field.

 

Daylight saving is a period from late spring to early fall when many countries set

 

their clocks ahead of normal local time by one hour to give more daytime light in

 

the evening.

 

Select Automatic if you use daylight savings time.

 

 

Resync Period

Specify the time period (in minutes) the Prestige waits before updating the system

 

time with the time server specified.

Apply

Click Apply to save the settings.

 

 

Cancel

Click Cancel to discard all changes.

 

 

5.3 Remote Access

Use the Remote Access screen to the session time limit a user is allowed to remotely access the Prestige for management. After the time period is reached, the Prestige automatically disconnects a management session. In this case, you need to log in again with the login username and password.

Click Configuration, System and Remote Access to display the screen as shown.

Figure 37 System: Remote Access

Enter a time period (in minutes) in the Allow Access field. Enter a time period of 0 to not time out a management session. Then click Enable.

59

Chapter 5 System