Prestige 794M User’s Guide

2.3 Resetting the Prestige

If you forget your password or cannot access the web configurator, you will need to reload the factory-default configuration file or use the RESET button on the Prestige. Uploading this configuration file replaces the current configuration file with the factory-default configuration file. This means that you will lose all configurations that you had previously and the password will be reset to 1234, also.

2.3.1 Procedure To Use The Reset Button

1Make sure the PWR LED is on before you begin this procedure.

2Press the RESET button for more than six seconds, and then release it. If the SYS LED begins to blink, the defaults have been restored and the Prestige restarts.

2.4Navigating the Web Configurator

The following summarizes how to navigate the web configurator from the HOME screen.

2.4.1 The Status Screen

The following screen shows the Status screen. This is the first screen that displays every time you access the web configurator.

Figure 8 Web Configurator: Status

•Click the links in the navigation panel to configure the Prestige features.

•Click the SAVE CONFIG button to save the current settings to the Prestige.

27

Chapter 2 The Web Configurator