ZyAIR Access Point Series User’s Guide
Table
FIELD |
| DESCRIPTION | EXMAPLE | |
|
|
|
|
|
WEP | Select Disable to allow wireless stations to communicate with the access | Disable | ||
Encryption | points without any data encryption. |
| ||
| Select |
| ||
|
|
|
|
|
Default Key | Enter the key number (1 to 4) in this field. Only one key can be enabled at | 1 | ||
| any one time. This key must be the same on the ZyAIR and the wireless |
| ||
| stations to communicate. |
| ||
|
|
| ||
Key 1 to Key 4 | The WEP keys are used to encrypt data. Both the ZyAIR and the wireless | 0x12345ab | ||
| stations must use the same WEP key for data transmission. | cde | ||
| If you chose |
| ||
| ASCII characters or 10 hexadecimal characters |
| ||
| If you chose |
| ||
| characters or 26 hexadecimal characters |
| ||
|
|
|
| |
|
| Enter “0x” before the key to denote a hexadecimal key. |
|
|
|
| Don’t enter “0x” before the key to denote an ASCII key. |
|
|
|
|
| ||
Authen. | Press [SPACE BAR] to select Auto, Open System Only or Shared Key | Auto | ||
Method | Only and press [ENTER]. |
| ||
| This field is N/A if WEP is not activated. |
| ||
| If WEP encryption is activated, the default setting is Auto. |
| ||
|
|
| ||
Block Intra- | Press [SPACE BAR] to select Yes or No and press [ENTER]. |
| ||
BSS Traffic |
|
|
|
|
|
|
| ||
Number of | Enter the number of association stations. The number should be from 1 to |
| ||
Association | 32. |
|
|
|
Stations |
|
|
|
|
|
|
| ||
Breathing LED | Press [SPACE BAR] to select Yes or No and press [ENTER]. |
| ||
|
|
| ||
Output Power | Press [SPACE BAR] to select 11dBm, 13dBm, 15dBm or 17dBm and press | 17dBm | ||
| [ENTER]. |
| ||
|
|
|
|
|
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
LAN Setup |