ZyAIR Access Point Series User’s Guide

 

 

 

Table 7-1 Wireless : Multiple ESS

 

 

 

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

 

 

 

 

Operating Mode

Select Multiple ESS in this field to display the screen as shown in Figure 7-3.

 

 

 

 

 

 

 

 

Choose Channel ID

Set the operating frequency/channel depending on your particular region.

 

 

 

 

To manually set the ZyAIR to use a channel, select a channel from the drop-

 

 

 

 

down list box. Click MAINTENANCE, WIRELESS and then the Channel Usage

 

 

 

 

tab to open the Channel Usage Table screen to make sure the channel is not

 

 

 

 

already used by another AP or independent peer-to-peer wireless network.

 

 

 

 

To have the ZyAIR automatically select a channel, click Scan instead.

 

 

 

 

Refer to the Wizard Setup chapter for a little more information on channels.

 

 

 

 

 

 

 

 

Scan

To have the ZyAIR automatically select a channel, click Scan instead.

 

 

 

 

 

 

 

 

Extended Service Set (ESS) Summary

 

 

 

 

 

 

 

#

This is the index number of each ESS.

 

 

 

 

 

 

 

 

ESSID

This is the identification name of each ESS.

 

 

 

 

 

 

 

 

ACTIVE

This field displays Yes if the ESS is active and No if it is not.

 

 

 

 

 

 

 

 

VLAN ID

This is the identification number of each VLAN.

 

 

 

 

 

 

 

 

Edit

Select the radio button next to the ESS index you want to configure and click

 

 

 

 

Edit to go to the EDIT ESS screen.

 

 

 

Delete

Select the radio button next to the ESS index you want to remove and click

 

 

 

 

Delete to remove the ESS.

 

 

 

Apply

Click Apply to save your changes back to the ZyAIR.

 

 

 

 

 

 

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

 

 

 

 

7.3.1 Edit ESS

Click Edit on the Wireless screen.

Multiple ESS and VLAN

7-5