ZyAIR Access Point Series User’s Guide
Table 20-1 Menu 24.10 System Maintenance : Time and Date Setting
FIELD | DESCRIPTION |
|
|
Use Time Server | Enter the time service protocol that your time server sends when you turn on the |
when Bootup | ZyAIR. Not all time servers support all protocols, so you may have to check with |
| your ISP/network administrator or use trial and error to find a protocol that works. |
| The main differences between them are the format. |
| Daytime (RFC 867) format is day/month/year/time zone of the server. |
| Time |
| seconds since 1970/1/1 at 0:0:0. |
| NTP |
| None. The default, enter the time manually. |
|
|
Time Server | Enter the IP address or domain name of your time server. Check with your |
Address | ISP/network administrator if you are unsure of this information. |
|
|
Current Time | This field displays an updated time only when you reenter this menu. |
|
|
New Time | Enter the new time in hour, minute and second format. |
Current Date | This field displays an updated date only when you |
New Date | Enter the new date in year, month and day format. |
Time Zone | Press [SPACE BAR] and then [ENTER] to set the time difference between your |
| time zone and Greenwich Mean Time (GMT). |
Daylight Saving | If you use daylight savings time, then choose Yes. |
Start Date | If using daylight savings time, enter the month and day that it starts on. |
End Date | If using daylight savings time, enter the month and day that it ends on |
Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to Cancel“ to save your configuration, or press [ESC] to cancel.
20.2.1 Resetting the Time
The ZyAIR resets the time in three instances:
i.On leaving menu 24.10 after making changes.
ii.When the ZyAIR starts up, if there is a time server configured in menu 24.10.
iii.
System Maintenance and Information |