ZyAIR Access Point Series User’s Guide

 

 

Table 13-6 Menu 3.5.3.1 ESS x Configuration

 

 

 

 

 

FIELD

DESCRIPTION

 

 

 

 

 

Edit MAC Address

Each service set has its own MAC address filter. Refer to MAC Address Filter section

 

Filter

for details.

 

 

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

13.3.4 Configuring Bridge Link (for ZyAIR B-3000 only)

Follow the steps below to configure bridge link on your ZyAIR.

Step 1. From the main menu, enter 3 to open Menu 3 – LAN Setup.

Step 2. Enter 5 to display Menu 3.5 – Wireless LAN Setup.

Menu 3.5 - Wireless LAN Setup

Operating Mode= Bridge

Edit MAC Address Filter= N/A

ESSID= N/A

Edit Roaming Configuration= N/A

Hide ESSID= N/A

Edit Multiple ESS Configuration= N/A

Channel ID= CH01 2412MHz

Edit Bridge Link Configuration= Yes

RTS Threshold= 2432

Block Intra-BSS Traffic= N/A

Frag. Threshold= 2432

Number of Associated Stations= N/A

WEP Encryption= Disable

Breathing LED= Yes

Default Key= N/A

Output Power= 17dBm

Key1= N/A

 

Key2= N/A

 

Key3= N/A

 

Key4= N/A

 

Authen. Method= N/A

 

Press ENTER to Confirm or ESC to Cancel:

Figure 13-11 Menu 3.5 Wireless LAN Setup

Step 3. In the Operating Mode field, press [SPACE BAR] to select Bridge and press [ENTER].

Step 4. Move the cursor to the Edit Bridge Link Configuration field. Press [SPACE BAR] to select Yes and press [ENTER]. Menu 3.5.4 – Bridge Link Configuration displays as shown next.

LAN Setup

13-11