ZyXEL G-360 User’s Guide

1.4.2 Ad-Hoc

In case you prefer to set up a small independent wireless workgroup without an AP, use the Ad-Hocmode.

Ad-hoc mode does not require an AP or a wired network. Two or more wireless clients communicate directly to each other.

Figure 1-2 Ad-Hoc ExampleTo set up an Ad-Hoc network, configure all wireless clients in Ad-Hoc networktype and use the same SSID, channel and security.

1.5G-360 Hardware and Utility Installation

Follow the instructions in the Quick Start Guide to install the ZyXEL Utility and make hardware connections. The ZyXEL Utility is a program that lets you configure wireless parameters in the G-360. These parameters must be the same as the access point (AP) or peer WLAN device that you are connecting with.

1.6Configuration Methods

To configure your G-360, use one of the following applications:

¾ZyXEL Utility (This guide shows you how to configure the G-360 using the ZyXEL Utility)

¾Wireless Zero Configuration (WZC) (recommended for Windows XP)

In Windows XP, you must disable WZC if you want to use the ZyXEL Utility. Refer to the appendices on how to deactivate WZC or how to use WZC to manage the G-360.

¾Odyssey Client Manager (not supplied)

Refer to the Odyssey Client documentation for more information.

Getting Started

1-3