ZyXEL G-360 User’s Guide

 

 

 

 

Table 6-1 Adapter

 

 

 

 

 

 

 

 

LABEL

 

DESCRIPTION

 

 

 

 

 

 

 

 

Transfer Rate

Select a transmission speed from the drop-down list box. Options are Fully Auto

 

 

 

(default), 1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps, 6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps,

 

 

 

22 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, 54 Mbps and 125 Mbps.

 

 

 

Select Fully Auto to allow your G-360 to operate at the maximum available transmission

 

 

 

rate. Otherwise, select a number based on your network environment.

 

 

Power Saving

Power consumption is reduced (especially good for notebooks that use batteries) in

 

 

Mode

power saving mode.

 

 

 

Select Enabled and then click Save to immediately cut wireless transmission to/from the

 

 

 

G-360. If the G-360 resides in a Windows 98 computer, it may also reboot. The G-360

 

 

 

remains in power saving mode until there is traffic to transmit or receive.

 

 

 

Otherwise, select Disabled.

 

 

 

 

 

 

 

 

OTIST (One-

Select this check box to enable OTIST.

 

 

Touch Intelligent

 

 

 

 

 

Security

 

 

 

 

 

Technology)

 

 

 

 

 

 

 

 

 

Setup Key

Enter the same setup key (of exactly eight ASCII characters) as the OTIST-enabled AP

 

 

 

or wireless router to which you want to associate. The default OTIST setup key is

 

 

 

“01234567”.

 

 

 

 

 

 

 

 

 

If you change the OTIST setup key on the OTIST-enabled AP, you

 

 

 

 

 

must also make the same change here.

 

 

 

 

 

 

 

Start

Click Start to encrypt the wireless security data using the setup key and have the

 

 

 

OTIST-enabled AP set your G-360 to use the same wireless settings as the OTIST-

 

 

 

enabled AP or wireless router. You must also activate and start OTIST on the OTIST-

 

 

 

enabled AP at the same time.

 

 

 

The process takes about three minutes to complete.

 

 

 

 

 

 

Save

Click Save to save the changes.

 

 

 

 

 

 

 

Adapter

6-5