ZyXEL G-360 User’s Guide

1.8.1 Site Survey

After you insert the G-360 and install the ZyXEL Utility, follow the steps below to connect to a network using the Site Survey screen.

1.Make sure a wireless network is available and within range.

2.Open the ZyXEL Utility and click the Site Survey tab to open the screen as shown next.

3.Click Scan to search for available wireless networks.

Figure 1-5 Site Survey

4.To join a network, either click an SSID in the table and then click Connect or double-click an SSID.

5.If the wireless security is activated for the selected wireless network, the Security Settings screen displays. This screen varies according to the network’s encryption method. Configure the same security settings as the associated network.

1-6

Getting Started