Manuals / Brands / Computer Equipment / Network Card / ZyXEL Communications / Computer Equipment / Network Card

ZyXEL Communications G-360 6.1.2 Starting OTIST, Yes, Reset, OTIST, Start, OTIST, Adapter, defaults, Setup Key, Setup Key, Wireless LAN

1 95

Download 95 pages, 1.86 Mb

ZyXEL G-360 User’s Guide

AP

You can enable OTIST using the reset button or the web configurator. If you use the reset button, the default (01234567) or previous saved (through the web configurator) Setup Key is used to encrypt the settings that you want to transfer.

Hold in the Reset button for one or two seconds.

If you hold in the Reset button too long, the device will reset to the factorydefaults!

In the web configurator, go to the Wireless LAN main screen and then select OTIST. To change the Setup Key, enter up to eight printable characters. To have OTIST automatically generate a WPA(2)-PSK key, select the Yes check box. If you manually configured a WEP key or a WPA(2)-PSK key and you also selected this check box, then the key you manually configured is used.

6.1.2 Starting OTIST

You must click Start in the AP OTIST web configurator screen and in the wireless client(s) Adapter screen all within three minutes (at the time of writing). You can start OTIST in the wireless clients and AP in any order but they must all be within range and have OTIST enabled.

1.In the AP, a web configurator screen pops up showing you the security settings to transfer. After reviewing the settings, click OK.

2.This screen appears while OTIST settings are being transferred. It closes when the transfer is complete.

6-2

Adapter

Contents

Page Copyright Copyright ©2005 by ZyXEL Communications Corporation Disclaimer Trademarks ZyXEL Limited Warranty NOTE Online Registration Federal Communications Commission (FCC) Interference Statement Notice Caution Certifications Table of Contents Appendix C Management with Wireless Zero Configuration Appendix D Wireless LANs Appendix E Types of EAP Authentication Appendix F Index List of Figures List of Tables List of Tables Getting Started This chapter introduces the G-360and prepares you to use the ZyXEL Utility 1.1About Your G-360 1.2Syntax Conventions 1.3Graphics Icons Key 1.4Application Overview 1.4.1 Infrastructure 1.4.2 Ad-Hoc 1.5G-360Hardware and Utility Installation 1.6Configuration Methods 1.7Accessing the ZyXEL Utility 1.7.1 ZyXEL Utility Screen Summary 1.8Network Connection Methods 1.8.1 Site Survey 360 will be disconnected Figure 1-6Site Survey: Security Settings Figure 1-7Link Info 1.8.2 Profiles Figure 1-9Profile: Add Figure 1-10Profile: Channel Disable WPA WPA2 Ad- Hoc Figure 1-11Profile: Encryption Figure 1-12Profile: Security Back Figure 1-13Profile: Confirm Activate Now Activate Later Figure 1-14Profile: Activate Activating a Profile Only one profile can be activated and used at any given time Activate Figure 1-15Profile Link Info This chapter shows you detailed information about the Link Info screen 2.1Transmission Rate (Transfer Rate) 2.1.1 G-plus 2.2Configuring the Link Info screen Figure 2-1Link Info Table 2-1Link Info Page 2.2.1 Trend Chart Site Survey 3.1Configuring the Site Survey screen Table 3-1Site Survey Security Settings This chapter discusses how to configure wireless security on the G-360 4.1Wireless LAN Security 4.1.1 Data Encryption with WEP 4.2Authentication Type 4.3Configuring Security Settings 4.3.1 WEP Encryption The values for the WEP keys must be set up exactly the same on all wireless devices in the same wireless LAN ASCII WEP keys are case sensitive 4.3.2 WPA-PSK/WPA2-PSK 4.3.3 WPA/WPA2 or You must first have a wired connection to a network and obtain the certificate(s) from a certificate authority (CA) Consult your network administrator for more information Page Profile This chapter describes how to configure and use a profile 5.1Configuring the Profile Screen 5.1.1 Adding a New Profile Figure 5-2Profile: Add New Profile Table 5-2Profile: Add New Profile Page Figure 5-3Profile: Select a Channel Disabled Figure 5-4Profile: Wireless Settings Figure 5-5Profile: Security Settings Exit Figure 5-6Profile: Confirm New Settings is started Figure 5-7Profile: Activate the Profile Page Adapter This chapter discusses OTIST and how to configure the Adapter screen 6.1Introduction to OTIST 6.1.1 Enabling OTIST 6.1.2 Starting OTIST 6.1.3Notes on OTIST 6.2Configuring the Adapter Screen Page Page Maintenance This chapter describes how to uninstall or upgrade the ZyXEL Utility 7.1The About Screen 7.2Uninstalling the ZyXEL Utility 7.3Upgrading the ZyXEL Utility Troubleshooting 8.1Problems Starting the ZyXEL Utility Program 8.2Problem with the Link Status 8.3Problems Communicating With Other Computers 8.4Related Documentation 8.5User Guide Feedback 8.6Customer Support Page Appendix A Product Specifications Page Appendix B Disable Windows XP Wireless LAN Configuration Tool Via the Wireless Network System Tray Icon Wireless Network Connection Advanced… Diagram 2 Windows XP SP1: Wireless Network Connection Change advanced settings Related Tasks Page Via the Control Panel Diagram 6 Windows XP SP1: Wireless Network Connection Status Diagram 7 Windows XP SP2: Wireless Network Connection Status Page Diagram 9 Windows XP SP2: Wireless Network Connection Properties Page Appendix C Management with Wireless Zero Configuration Activating Wireless Zero Configuration Connecting to a Wireless Network Page Page Refresh network list Diagram 14 Windows XP SP2: Wireless Network Connection Chart 2 Windows XP SP2: Wireless Network Connection Refresh Available networks Configure Preferred networks Diagram 15 Windows XP SP1: Wireless Network Connection Properties Connect Anyway Diagram 16 Windows XP SP2: Wireless Network Connection: WEP or WPA-PSK Diagram 17 Windows XP SP2: Wireless Network Connection: No Security Chart 3 Windows XP: Wireless Networks Security Settings Authentication Authentication Wireless (network) properties Diagram 19 Windows XP: Wireless (network) properties: Authentication Chart 5 Windows XP: Wireless (network) properties: Authentication Authentication Properties Wireless (network) properties: Authentication Diagram 20 Windows XP: Protected EAP Properties Chart 6 Windows XP: Protected EAP Properties the certificate(s) from a certificate authority (CA). Consult your network administrator for more information Diagram 21 Windows XP: Smart Card or other Certificate Properties Chart 7 Windows XP: Smart Card or other Certificate Properties Ordering the Preferred Networks Page Diagram 23 Windows XP SP1: Wireless Networks: Preferred Networks Move up Move down Remove Appendix D Wireless LANs Wireless LAN Topologies IEEE WPA(2) Page Diagram 27 WPA(2)-PSKAuthentication Diagram 28 WPA(2) with RADIUS Application Example Appendix E Types of EAP Authentication EAP-MD5 (Message-DigestAlgorithm 5) EAP-TLS(Transport Layer Security) EAP-TTLS(Tunneled Transport Layer Service) LEAP Appendix F Index Online Registration Open authentication mode OTIST See PEAP PEAP