ZyXEL G-360 User’s Guide

4.If you change the SSID or the keys on the AP after using OTIST, you need to run OTIST again or enter them manually in the wireless client(s).

5.If you configure OTIST to generate a WPA(2)-PSK key, this key changes each time you run OTIST. Therefore, if a new wireless client joins your wireless network, you need to run OTIST on the AP and ALL the wireless clients again.

6.2Configuring the Adapter Screen

Use the Adapter screen to set a transfer rate, enable power saving and activate OTIST.

Figure 6-1 Adapter

The following table describes the labels in this screen.

Table 6-1 Adapter

LABEL

DESCRIPTION

 

 

Adapter Setting

6-4

Adapter