Table 21 Management > Upgrade Firmware
LABEL | DESCRIPTION | |
|
| |
Select File | Type in the location of the file you want to upload in this field or click Browse... to | |
find it. | ||
| ||
|
| |
|
| |
Browse... | Click Browse... to find the .bin file you want to upload. Remember that you must | |
decompress compressed (.zip) files before you can upload them. | ||
| ||
|
|
Upload
Click Upload to begin the upload process. This process may take up to two minutes.
Note: Do not turn off the MWR102 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into the MWR102 again.
The MWR102 automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 31 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears. Click Return to go back to the Firmware screen.
68
