ZyXEL Communications MWR102 manual Wireless Site Survey AP Mode Only

	This displays Configured when the MWR102 has connected to a wireless
	network using WPS. The current wireless and wireless security settings also
Status	appear in the screen.
	This displays Unconfigured if WPS is disabled and there are no wireless or
	wireless security changes on the MWR102 or you click Reset to Unconfigured
	to remove the configured wireless and wireless security settings.
Self-PIN Number	This displays a PIN number last time system generated. Click Generate to
	generate a new PIN number.
Reset to	This button is only available when the WPS status displays Configured.
	Click this button to remove all configured wireless and wireless security settings
Unconfigured
	for WPS connections on the MWR102.
Push Button	Press this button to begin the PBC process.
Configuration
Current Key Info	The authentication type, encryption type, and key are displayed here if security
	settings are configured.
Client PIN	This is where the PIN is displayed when using PIN setup. To generate a PIN,
number	press the Start PIN button.
Apply	Click Apply to save your changes back to the MWR102.
Refresh	Click Refresh to get this screen information afresh.

7.9 Wireless Site Survey (AP Mode Only)

Use this screen to view nearby wireless networks. Go to Wireless > Site Survey to open the following screen.

Figure 20 Wireless > Site Survey

48