4Make sure your computer (with a wireless adapter installed) is within the transmission range of the MWR102.
5Check that both the MWR102 and your wireless station are using the same wireless and wireless security settings.
6Make sure you allow the MWR102 to be remotely accessed through the WLAN interface. Check your remote management settings.
•See the chapter on Wireless LAN in the User’s Guide for more information.
I can’t access the Web
When you change from router mode to AP mode, your computer must have an IP address in the range between “192.168.100.3” and “192.168.100.254”.
Refer to Appendix C for instructions on how to change your computer’s IP address.
The following tables summarize the MWR102’s hardware and firmware features.
80