ZyXEL Communications network camera manual Network Diagnostic, Network Bandwidth

5.5.3Network Diagnostic

Here you can run the diagnostic tool for your current network settings, and it will show error messages if any anomaly is detected. For further information on error messages, please refer to the troubleshooting section.

5.5.4Network Bandwidth

This automatic network connection test helps users better define the appropriate video bitrate for their network. To perform the network bandwidth test:

1.Go to [Setup] > [Network], and click on [Network Bandwidth] located on the left menu to start.

2.Wait for your browser to prompt the installation of a java plug-in. Click the text to accept.

3.The camera will begin testing your connection’s speed.

4.When the diagnostic is complete, the camera will advise you as to the optimal settings for your camera.