ZyXEL Communications network camera manual 8 RTP, 9 QoS

To access the UPnP screen, navigate to [Settings] > [Network] > [UPnP]. The following screen will appear.

Note: To enable UPnP on Windows, go to Add or Remove Programs in Control Panel, then click Add/Remove Windows Components, double-click “Network Services,” and check “UPnP User Interface.”

5.5.8RTP

If you want to broadcast video using RTP (Real-time Transport Protocol), use this page to set up the port range, video/audio address, and port number.

To access the RTP page, navigate to [Settings] > [Network] > [RTP]. The following screen will appear.

5.5.9QoS

QoS (Quality of Service) helps prioritize network traffic in order to reserve bandwidth for necessary applications. This page will allow you to customize packet priority for different types of packet data (video/audio, event/alarm, web) by specifying values for the DSCP (Differentiated Services Code Point) field in their IP packets. The DSCP value that