ZyXEL Communications 9.6 The PPPoE Screen, Apply, Reset

Chapter 9 Network

The following table describes the labels in this screen.

Table 32 Network > UPnP > Port Mapping

LABEL	DESCRIPTION
LAN	Use these fields to specify what port the Internet gateway uses to connect from its LAN
	port to the service on the NSA.
Service Name	This read-only field identifies a service on the NSA.
LAN Port	Specify the port number (1~65,536) the Internet gateway needs to use to connect from
	its LAN port to the service on the NSA. This is the NSA’s internal port number for the
	service. Changing a service’s port number in this screen also changes it in other NSA
	screens that display it. Similarly, changing a service’s port number in another NSA screen
	also changes it here.
	The number below this icon is your Internet gateway’s WAN IP address (the IP address
	your Internet gateway uses for connecting to the Internet).
WAN	Use these fields to specify what port Internet users must use to connect to the Internet
	gateway’s WAN port in order to connect to the service on the NSA.
Service Name	This read-only field identifies a service on the NSA.
Enable WAN	Select this check box to have UPnP configure your Internet gateway to allow access from
Access	the Internet to the NSA’s service.
	If you clear this check box, people will not be able to access the NSA’s service from the
	Internet unless you manually configure the Internet gateway’s firewall and NAT rules to
	allow access.
WAN Port	When you enable WAN access for one of the NSA’s services, specify the port number
	(1~65,536) Internet uses need to use to connect to the Internet gateway’s WAN port in
	order to access the service on the NSA. Whoever wants to access a service on the NSA
	from the Internet must use this port number.
	P2P download’s WAN port must be the same as the LAN port.
	Make sure there is not another service using TCP protocol with the same port number.
	If another device is using the same port (the Internet gateway has the same port number
	mapped to another LAN IP address), the NSA overwrites it when you apply the setting and
	WAN users can no longer access the other device.
	This icon means the service’s LAN and WAN port numbers must be the same.
	This icon means another service is using the same port number as this service. Change
	the port number of one of the services so they use different port numbers.
	This icon means another service is using the listed port, but the port the other service is
	using will be replaced if you apply the setting. The other service will no longer be
	accessible from the listed port.
Apply	Click Apply to save your changes back to the NSA.
Reset	Click Reset to begin configuring this screen afresh.

9.6 The PPPoE Screen

Use this screen to configure PPPoE settings for a direct Internet connection.

182
	Media Server User’s Guide