ZyXEL Communications Configuration > System Setting

Chapter 2 NAS Starter Utility

Click Configuration > System Setting in the main utility screen to display the following screen. Figure 14 NAS Starter Utility > Configuration > System Setting

The following table describes the labels in this screen.

Table 4 NAS Starter Utility > Configuration > System Setting

LABEL	DESCRIPTION
Server Name	Specify a name to uniquely identify the NSA on your network. You can enter up to 15
	alphanumeric characters with minus signs allowed but not as the last character. The
	name must begin with an alphabetic character (a-z) and is case sensitive.
Time Zone	Choose the time zone of your location. This will set the time difference between your
	time zone and Greenwich Mean Time (GMT).
Enable PPPoE	Click this if your Internet connection requires you to enter a user name and password to
Connection	connect to the Internet. Enter your user name and password
Automatically get	Select this if the NSA is automatically assigned an IP address from the ISP or a DHCP
IP address	server in your network.
Manually assign IP	Select this if you want to assign the NSA a fixed IP address, subnet mask and default
address	gateway.
	Note: Do not configure an IP address that is already in use in your network. This results to
	a network IP address conflict and makes the NSA inaccessible.
Use from DHCP	Domain Name System (DNS) is for mapping a domain name to its corresponding IP
server	address and vice versa. Select this if the NSA is automatically given DNS information
	from the ISP or a DHCP server in your network.
DNS	Domain Name System (DNS) is for mapping a domain name to its corresponding IP
	address and vice versa.
	Select Use from DHCP server if the NSA is automatically given DNS information from
	the ISP or a DHCP server in your network.
	Select Manually assign DNS server if you were given specific IP address(es) of the
	DNS server(s). Enter the primary and secondary DNS in the corresponding fields.

28
	Media Server User’s Guide